1.3.2. New Job

1.3.2. New Job
1

Job name

1. Job name
When the job starts from InkZonePerfect the name is automatically set
and refers to the CTP / CIP3 job name scheme from the prepress workflow.
2

Customer name

2. Customer name
Add a customer/print buyer name to the job.
IZReport can send PDF reports to customers. For this scenario, it is Important that the
costumer name set here matches the one in the e-mail setup, see here: 1.2.7. System Setup
 
3

Confirm / Cancel

3. Confirm / Cancel
Confirm or cancel job setup
4

Colorbar

4. Colorbar
Colorbar for the front side print.
When printing with perfector, the back side colorbar needs to be set too.
 
Define spot color patches in the colorbar, see here: 1.3.2.2. Spot color job
 
5

Targetset

5. Targetset
Print targetset.
When job starts from InkZonePerfect the targetset is set automatically .
How to link the ink-preset calibration curve from InkZonePerfect
to a targetset see here: 1.2.3.2. New Targetset
6

Colorbar height

6. Colorbar height
When using an IntelliTrax, the colorbar height needs to be set here.
7

Colorbar

7. Colorbar
Preview of the selected colorbar
8

Advanced Colorbar

8. Advanced Colorbar
Align the measurement data related to the ink-keys either centred (standard) or shifted.
See details here: Shifted ink-key alignment
9

Advanced for ITX

9. Advanced for ITX
In advanced setup set the colorbar position with XY coordinate values when using an IntelliTrax scanner.
Go to Intellitrax XY colorbar setup: 1.3.2.2. Advanced Job Settings
 
10

Job template

10. Job template
Select a predefined template job. A template job has a defined targetset, colorbar, color sequence and machine type.
See here how to set a template job:  1.1.1.1. Job-Setup View
11

Print units

11. Print units
Print unit with target density and its assigned color. Click on the unit to add or change a color.
12

Got to Spot color setup

12. Got to Spot color setup
13

Return to Job List

13. Return to Job List
14

Job setup
Graphometronic

14. Job setup 
Graphometronic