1.4.2. Color-Control overview

1.4.2. Color-Control overview
1

Select ink-key view

1. Select ink-key view
Select the data view.
 
 
Plate coverage
 
Ink-key profile sent to press.
 
Ink-key data received from press. The press data is displayed after the console stores the job data to InkZone.
 
Ink-key data of the archived job. The data is visible after the console stores job data to InkZone and the archive button is pressed.
 
2

Ink-key relative

2. Ink-key relative
Ink-key correction in relative view is displayed after receiving scan data (default view).
3

Ink-key absolute

3. Ink-key absolute
Ink-key correction in absolute view is displayed after receiving scan data.
4

Density relative

4. Density relative
Measured density data in in relative mode
See here: 1.4.2.2. Density relative view
5

Density absolute

5. Density absolute
Measured density data in absolute mode
6

Density target

6. Density target
The target density set by the measurement software.
7

DeltaE

7. DeltaE
DeltaE view.
8

Ink-keys

8. Ink-keys
Ink-keys displayed in relative view. The ink-key corrections data is calculated by the InkZone color-control engine.
9

Ductor

9. Ductor     Ductor / sweep value
10

Save job

10. Save job
Store job data to the archive or to the linearization job list.
The job data can only be stored when ink-key data was stored from press to InkZone.
 
Archive job data.
 
Store data to for linearization and optimization of the calibration curve.
11

Synchronize

11. Synchronize
Synchronize ink-key and ductor with press
12

Calibration curve

12. Calibration curve
The name of the calibration curve used for ink presetting the press.
13

Sheet information

13. Sheet information
Scan measurement number with scan side indicator and time.
14

Print status

14. Print status
Print status.
 
MakeReady mode
 
OK-sheet is set.
 
Production mode
15

Go to Home

15. Go to Home