1.6.2. Edit

1.6.2. Edit
1

Reset

1. Reset
Reset all previously made changes.
2

Unlock / lock

2. Unlock / lock
To modify the calibration curve, press the unlock / lock button.
 
Press the unlock button to edit calibration curve.
With this icon active, curve editing is not possible.
 
With this icon active, curve editing is enabled.
 
3

Color

3. Color
C M Y K colors in calibration curve.
4

Jobs

4. Jobs
List with jobs used for linearization.
5

Ductor / Sweep

5. Ductor / Sweep
Red curve and dots indicate ductor / sweep data.
6

Ink-key data

6. Ink-key data
Black curve and dots indicate ink-key data.
Green dashed line is the calibration before the linearization.
7

Optimization method

7. Optimization method
Choose between optimization mode.
Initial: use for the first linearization only
Continued: use after first linearization
 
8

Date filter

 
Select jobs by date and creates a filtered job list:
 
Clears all applied filters and all jobs are shown in job list.
 
 
from today.
 
 
from the last week.
 
 
from the last month.
 
 
from a customized time frame with a start and end date.
 
9

Modify curve

9. Modify curve
 
  • Relative change selector
  • Absolute change selector
  • Change positive
  • Change negative
  • Apply curve smoothing