1.7.1.1. Advanced features

Side ink-key management

Allows the operator to setup the ink-key opening of the side ink-keys with an arbitrary value.

1) Automatic needs to be disabled

2) Define the ink-key opening value

3) Define the number of side keys. E.g. a value 2 sets ink-key nr 1 and 2 plus the last two ink-keys as side ink-keys.

The side ink-keys are automatically set to selected value.

In the press preparation screen, enable through the advanced button, left hand side of the transfer button.

Smoothing is applied to the ink profile.

Typically, the feature is enabled for MAN consoles where the ink-keys are set between 0 and 250.

To assign the F side ink-preset data to the units after the perfector.

Change the indicator of the front and back side:
F/B
A/B