1.2.6.14. SpectroDens

1.2.6.14. SpectroDens
1

Scan parameter setup

1. Scan parameter setup
2

Sheet orientation

2. Sheet orientation
See details here: 1.2.6.10. Sheet Orientation
3

Connection

3. Connection
Setup the SpectroDens IP configuration with SpectroConnect.
See document here: SpectroDens Wlan Setup
 
For IZM, setup the IP address and enable the Wifi setting.
An USB connection is used when the Wifi setting is off.
4

Specifications

4. Specifications
Producer
Techkon
 
Min. patch size
6 mm without contrast bar (patch separator)
 
Scan length max
200 patches in 10 sec
 
Connected by
USB or WiFi
 
Measurement Conditions
 
M0, M1, M2, M3
Comment
Colorbar scanning for color-control is only supported with SpectroDens Premium
5

Return to Scanning Device Setup

5. Return to Scanning Device Setup