InkZoneMove 8
×
Menu
 

1.2.8.7.1. Export rules IZTVI

Setup the export rules for CTP plate compensation curves.
 
1.2.8.7.1. Export rules IZTVI
1

Export rule
collapsed

1. Export rule 
collapsed
Export rule with press and targetset name. Expand it to review the setup and see processed jobs  with the arrow down button on the right.
2

Press

2. Press
Select the press from the list box
3

Targetset

3. Targetset
Select the targetset from the list box
4

Schedule

4. Schedule
The rule is repeated every "number" of "days/weeks"
5

Tolerances

5. Tolerances
Measurement data exceeding DeltaE or density are ignored during export
6

Add

6. Add
Create a new rule
7

Job list

7. Job list
Every export is listed here with date, number of used jobs and their DeltaE, Density averages
8

Run

8. Run
Test the setup from here and see the expor data in IZTVI
9

Measurements

9. Measurements
Number of measurements required to create an export
10

Activate filter set

10. Activate filter set
All data is ignored which do not match the setup rules
11

Activate / Delete

11. Activate / Delete
Enable the rule. Delete it with the red cross on the right
12

Export rule
expanded

12. Export rule 
expanded
Export rule expanded view
13

Return to CTP Curve Compensation

13. Return to CTP Curve Compensation